Ordering a new bike is exciting and at Ribble, we make sure the process is as smooth as the first ride. Every bike is hand-assembled by our expert mechanics, carefully packaged, and delivered with minimal setup required. Here’s everything you can expect when your Ribble arrives.

• Two-piece bar & stem: Reattach the bars using the stem faceplate and torque evenly in a cross pattern.
• Integrated bar & stem: Slide the bar assembly back onto the steerer, fit the top cap, and tighten bolts to the correct torque.

• Disc brake bikes: Insert the thru-axle and tighten to 10Nm.
• Rim brake bikes: Slot in the quick-release skewer and secure until there’s firm resistance when closing the lever.

Caution: Don’t pull the brake lever without a wheel or pad spacer in place.

• Depending on your bike, this will use either a wedge system or an external collar. Tighten to the torque values printed on your frame.
• If your bike is fitted with Shimano Di2, connect the battery cable to the seat post before inserting.

Pedals are rider-specific and not supplied as standard. If you’ve ordered some, grease the threads and screw in by hand first before tightening with a pedal spanner or Allen key. Remember: right side = clockwise, left side = anti-clockwise.

• Shimano Di2: Pre-calibrated and charged. Use the E-Tube app for diagnostics, firmware updates, or customisation.
• SRAM AXS: Fully wireless, ready to ride, and paired with the SRAM AXS app for setup and updates.

• Check rear derailleur alignment (look from behind - pulleys should sit directly under the sprockets).
• Inflate tyres to the recommended pressures on the sidewall.
• Double-check all bolts are torqued to the correct settings.

• Keep your chain clean and lubricated.
• Avoid clamping carbon frames in a workstand — always clamp by the seatpost.
• Never use a pressure washer to clean your bike.
• Book in for a service every six months, or more often if riding heavily through winter.

This blog covers the essentials to get you riding, but if you’d like the complete Welcome Pack - with every detail, torque setting, and maintenance tip included - you can download it here: Ribble Welcome Pack.

Your Ribble is now ready for its first outing. Once you’re rolling, don’t forget to share your adventures — tag us @ribble_cycles so we can see where your bike takes you.

Want to see what else Ribble has on offer? Explore the full Ribble bike range to view every model and use the BikeBuilder tool to custom-spec your dream ride.